.

ET5X Accessories

Zebra ET5X Accessories

Hard-Wired Power Supply with USB-C PD and USB-A Ports
216406

Hard-Wired Power Supply with USB-C PD and USB-A Ports

  • Hard-Wired Power Supply
  • Dual USB Ports
  • USB-C to USB-C Cable 
  • 2-Pin Molex Cable

 

Cig-Plug Adapter with USB-C PD and USB-A Port
945031

Cig-Plug Adapter with USB-C PD and USB-A Port

  • Cigarette Lighter Adapter
  • USB-C PD and USB-A with USB-C to USB-C Cable (1.5 Meters)
  • Input: 12-24 VDC
  • Up to 36 Watts Combined
Wall Power Adapter with USB-C PD and USB-A Port
945032

Wall Power Adapter with USB-C PD and USB-A Port

  • Port 1 supports USB-C devices
  • Port 2 supports USB-A QuickCharge 3.0

Multi-USB-A / Ethernet Hub Kit with Cover and Cable Retention Clamps for Charging Cradles with Expansion Back
216258

Multi-USB-A / Ethernet Hub Kit with Cover and Cable Retention Clamps for Charging Cradles with Expansion Back

  • Hub Kit allows additional USB-A Ports and 10/100/1000 Ethernet
  • Pre-Drilled mount holes that fit ET50 Cradles
  • Made from durable Acetal plastic
  • For Expansion Back
  • Fits 7xx266, 7xx267, 71243,713403

 


 

DC 48-12 V Step Down Converter with 6 ft. Barrel Jack Cable
216240

DC 48-12 V Step Down Converter with 6 ft. Barrel Jack Cable

  • For installation into vehicle power supply
  • Works with forklifts and other vehicles that use up to 48 volt direct current (VDC) power systems.
  • Input surge voltage of up to 60 VDC.
  • Converts 60V, 48V, 36V, 24V, and 18V systems to 12V
  • 36W continuous output

Replacement Block with USB-A Host Port for ProClip Charging Cradles for Zebra ET5X 8.3", 8.4" and 10.1" Sizes
216230

Replacement Block with USB-A Host Port for ProClip Charging Cradles for Zebra ET5X 8.3", 8.4" and 10.1" Sizes

  • Replacement block for ProClip Zebra ET5X Series Cradles
  • Includes cable retention clips and fasteners
  • Includes Fasteners and Zip ties for replacing existing blocks on an ET50 Series Cradle

 

Extension Plate for Expansion Back Cradles - 8"
216250

Extension Plate for Expansion Back Cradles - 8"

  • Extension plate allows an additional AMPS mounting point to the side of the cradle.
  • Pre-drilled AMPS hole pattern
  • Made from durable ABS plastic
Extension Plate for Expansion Back Cradles - 10"
216251

Extension Plate for Expansion Back Cradles - 10"

  • Extension plate allows an additional AMPS mounting point to the side of the cradle.
  • Pre-drilled AMPS hole pattern
  • Made from durable ABS plastic
Extension Plate for MSR Attachment for Zebra ET50/51/55/56
215916

Extension Plate for MSR Attachment for Zebra ET50/51/55/56

  • Extension plate allows a MSR device holder to be added to the ET5X with rugged frame
  • Pre-drilled AMPS hole pattern
  • Made from durable ABS plastic
Key Lock Module
216229

Key Lock Module

  • Replacement or Upgrade for ProClip Cradles
  • Includes 2 keys

Spring Lock Module
216228

Spring Lock Module

  • Replacement or Upgrade for ProClip Cradles

USB Cable Retention Clip
100144

USB Cable Retention Clip

  • 1x Cable Clip
  • 2x Machine Screws
    • M3 x 14mm
    • Torx Drive - T10
  • 1x Torx Wrench - T10
Power Cable Retention Clip
100143

Power Cable Retention Clip

  • 1x Cable Clip
  • 2x Machine Screws
    • M3 x 14mm
    • Torx Drive - T10
  • 1x Torx Wrench - T10
Quick View Off On

()